Forums
The Wilson R/C Modelers Association :: Forums :: Wilson R/C :: General Discussion
 
<< Previous thread | Next thread >>
What's everyone working on
Moderators: Admin, Bob, Mike
Author Post
andrewrcguy
Tue Nov 27 2007, 01:15PM
Guest
Well my latest inderver. At the moment is to convert my Hanger 9 Funtana to Electric. I have the motor mounted and am just waiting on the speed control. It is set up on 8s. Look for it at the field soon.

[ Edited Thu Nov 29 2007, 07:01AM ]
Back to top
Mike
Wed Nov 28 2007, 02:06PM
Registered Member #13
Joined: Fri Mar 16 2007, 07:54AM
Posts: 5
 I know you told me, but I forgot,... what size Funtana are you converting? I'd like to do a larger plane one day, maybe the Extreme Flight 74" Yak would be a good one, or maybe the Dualsky 260 like you have. That would definitely be more affordable.
Channel 17, 24, 50


You can do it, you just have to try!
Back to top
andrewrcguy
Thu Nov 29 2007, 08:34AM
Guest
Opps sorry it's the hanger 9 funtana 90. I had to order a speed control that would handle 30 volts but it new one should be here first of the week. So far it is set up with the Dualsky XM5060-10 motor (124.99) which is the equvilent of a 2 stroke 110. I will be running a OEMRC speed control 100 amp (109.99) And 2 4S 3700 batteries. The batteries are the ones for my Eflight 25 Stick , I also run them in my Dualsky Extra 260. I just used a sieries connector to get 8s.
Back to top
 

Jump:     Back to top
Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System